Check DTC Memory (Function 02)

Connect scan tool V.A.G 1551 and enter address word "02 Transmission electronics" and advance until "Select function XX" appears in the display. See SCAN TOOL V.A.G 1551, CONNECTING AND SELECTING FUNCTIONS  .

Indicated on display:

• Rapid data transfer HELP
• Select function XX

Press keys 0 and 2. (The function "Check DTC memory" is selected with 02).

Indicated on display:

• Rapid data transfer Q
• 02 - Check DTC memory

Confirm entry with key Q.

The number of stored DTCs or "No DTCs recognized" appears in the display.

If "No DTC recognized" appears after performing repairs, the On Board Diagnostic is completed.

In the event that the automatic transmission does not operate properly despite On Board Diagnostic, carry out repairs as per troubleshooting program. See appropriate OVERHAUL article. The stored DTCs are displayed in turn and printed out.

Press "right arrow" key.

After the last DTC has been displayed and printed out, the malfunctions should be repaired as described in the DTC table. See DIAGNOSTIC TROUBLE CODE (DTC) TABLE  .

Press "right arrow" key.

Indicated on display:

• Rapid data transfer HELP
• Select function XX

After checking the DTC memory and repairing the malfunctions, erase DTC memory. See ERASE DTC MEMORY (FUNCTION 05)  .