Ending Output
WARNING: This page is about a different car, the 2003 Volkswagen EuroVan and 2002 Volkswagen EuroVan. However, it is still accessible from the selected car via links, so may be relevant.
After testing is completed, ensure SELECT FUNCTION XX is being displayed. If FAULT MEMORY WAS NOT CHECKED is being displayed, test sequence is faulty. Ensure all DTCs are fixed and cleared from memory and repeat test procedure. See CLEARING TROUBLE CODES under SELF-DIAGNOSTICS. If FAULT MEMORY WAS NOT CHECKED is not being displayed, press buttons "0" and "6" to end output. Press "Q" button to confirm input. ENTER ADDRESS WORD XX should be displayed. Turn ignition off and disconnect scan tool.