Service Reminder Indicator (SRI) display/function

SRI programming display	Counter function
OEL1.S	Distance counter (miles/km) for engine oil change
OEL2.S	Time counter for engine oil change every 6 months
IN01.S	Time counter for maintenance every 12 months
IN02.S	Distance counter (miles/km) for maintenance every 30,000 miles (48,000 km)

• With OEL1.S indicated on display, press the lower digital clock reset button or the analog clock reset button.
  • 7500 (miles) or 12,000 (km) indicated on display

    Distance can now be set for next oil change.

Fig 1: Locating Indicator (SRI)
Courtesy of VOLKSWAGEN OF AMERICA, INC.

Example: 

The instrument cluster is replaced on a 4 month old vehicle with 5000 miles. The 5000 accumulated miles must be subtracted from the displayed mileage setting of 7500. The new mileage setting should read 2500 (7500 - 5000 = 2500).

• Press the lower digital clock reset button or the analog clock reset button to decrease mileage setting in intervals of 500 until the correct setting is displayed.

After OEL1.S distance counter is set correctly:

• Press odometer reset button.
  • OEL2.S (time counter) indicated on display
• Press the lower digital clock reset button or the analog clock reset button.
  • 6 (months) indicated on display

    Time can now be set for next oil change.

Example: 

In the previous example, the instrument cluster was replaced on a 4 month old vehicle. The accumulated time of 4 months must be subtracted from the displayed setting of 6. The new time setting should read 2 (6 - 4 = 2).

• Press the lower digital clock reset button or the analog clock reset button to decrease the time setting until the correct setting is displayed.

After OEL2.S time counter is set correctly:

• Press odometer reset button.
  • IN01.S (time counter) indicated on display
• Press the lower digital clock reset button or the analog clock reset button.
  • 12 (months) indicated on display

    Time can now be set for the next maintenance interval.

Example: 

In the previous example, the instrument cluster was replaced on a 4 month old vehicle. The accumulated time of 4 months must be subtracted from the above displayed setting of 12. The new time setting should read 8 (12 - 4 = 8).

• Press the lower digital clock reset button or the analog clock reset button to decrease the time setting until the correct setting is displayed.
  NOTE: The IN01.S display (usually associated with the 15,000 mile/24,000 km maintenance) is programmed by months only (not distance) and uses the distance counter from the OEL1.S (7500 mile/12,000 km oil change) which was set previously.

  After IN01.S time counter is set correctly:

• Press odometer reset button.
  • IN02.S (distance counter) indicated on display
• Press the lower digital clock reset button or the analog clock reset button.
  • 30,000 (miles) or 48,000 (km) indicated on display

    Distance can now be set for next 30,000 mile (48,000 km) maintenance interval.

Example: 

In the previous example, the 5000 accumulated miles must be subtracted from the above displayed mileage setting of 30,000. The new mileage setting should read 25,000 (30,000 - 5000 = 25,000).

• Press the lower digital clock reset button or the analog clock reset button to decrease mileage setting in intervals of 500 until correct setting is displayed.

After IN02.S time counter is set correctly:

• Switch ignition OFF.
  • SRI programming is stored