Work step 3: Matching throttle valve control module to engine control module

Indicated on display

Fig 1: Scan Tool Display - Work Step 3: Matching Throttle Valve Control Module To Engine Control Module (Rapid Data Transfer)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

• Press keys 0 and 4 for function "Introduction of basic setting" and confirm entry with Q key.

Indicated on display

Fig 2: Scan Tool Display - Work Step 3: Matching Throttle Valve Control Module To Engine Control Module (Basic Setting)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

• Press keys 0, 6 and 0 for "Display group number 60" and confirm entry with Q key.

Indicated on display

Fig 3: Scan Tool Display - Work Step 3: Matching Throttle Valve Control Module To Engine Control Module (System In Basic Setting)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

• Check specifications in display zones 3 and 4:

  Display zone 3: Idling speed

  Display zone 4: ADP. runs, ADP. OK.

• Terminate engine basic setting at earliest after 30 seconds by pressing the --> key.

If the display does not indicate as described:

• Check throttle valve control module. See THROTTLE VALVE CONTROL MODULE, CHECKING .

  If the display indicates as described:

• Start engine and run at idling speed.