Work step 2: Erase DTC Memory

Indicated on display:

Fig 1: Scan Tool Display - Work Step 2: Erase DTC Memory (1 Of 2)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Press keys 0 and 5 for the function "Erase DTC Memory" and confirm entry with Q key.

NOTE: The readiness code is reset or erased each time the DTC memory is erased.

Indicated on display

Fig 2: Scan Tool Display - Work Step 2: Erase DTC Memory (Rapid Data Transfer)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

NOTE: If the ignition is switched off between "Check DTC Memory" and "Erase DTC Memory" the DTC memory will not be erased.