Multi-function steering wheel control module, removing and installing
Removing
CAUTION:
Before beginning repairs on the electrical system:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- Remove fuse box cover.
- Vehicles through 09.00: Pull control module for multi-function steering wheel out from relay plate.
- Vehicles from 10.00: Pull control module for multi-function steering wheel out from relay plate.
Installing
Install in reverse order of removal.
- Vehicles through 11.01: Code multi-function steering wheel control module. Refer to 01 ON BOARD DIAGNOSTIC (OBD)
- Vehicles from 12.01: Code multi-function steering wheel control module using VAS 5051 Vehicle Diagnostic Testing and Information System or VAS 5052 Vehicle Testing and Service System in mode "Guided Fault Finding". Refer to Multi-function steering wheel from 12.01, performing OBD program functions using VAS 5051/5052 .