LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1998 >> Jetta TDI, Automatic >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Anti-Theft Systems >> Remote Locking/Alarm System Transmitter Programming (GROUP 57, NO. 97-06)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Locking/Alarm System Transmitter Programming (GROUP 57, NO. 97-06)

Publication date: 1997-11-04
Reference number: GROUP 57, NO. 97-06

REMOTE LOCKING/ALARM SYSTEM TRANSMITTER PROGRAMMING

REMOTE LOCKING/ALARM SYSTEM TRANSMITTER PROGRAMMING

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 57, NO. 97-06, Date of Issue:  November 4, 1997

REMOTE LOCKING/ALARM SYSTEM TRANSMITTERS, PROGRAMMING/REPROGRAMMING

Model(s): 1998 Volkswagen Golf, GTI, Jetta With Remote Locking

Group: 57 - Doors - Front

Bulletin No.: 97-06

Date: November 4, 1997

SERVICE INFORMATION

If new or additional remote locking/alarm system transmitters are required, use the following procedure to program the new transmitter or reprogram existing transmitters.

NOTE: Up to a maximum of four transmitters may be programmed for each vehicle. Programming procedure for all four transmitters must be completed within one minute.

SERVICE

- Switch ignition ON.

- Close all doors and rear hatch/trunk lid.

- Using second key in driver's door, turn key to UNLOCK position and hold for approx. 10 seconds or until alarm horn sounds 3 times.

- Press the unlock/disarm button on first transmitter (alarm horn will briefly sound once to confirm programming).

- Press the unlock/disarm button on second transmitter (alarm horn will briefly sound twice to confirm programming).

- Repeat procedure for transmitters 3 and 4 (if necessary).

- Turn and hold the key in the driver's door lock to the UNLOCK position (Within ten seconds the alarm horn will sound 3 times).

- Switch ignition OFF.

NOTE: For security reasons, the convenience close feature for power windows and sunroof are activated using the key only. If one transmitter is activated 200 times consecutively (out of reach of the vehicle), all transmitters MUST be reprogrammed.

When procedure applies to vehicles within The New Vehicle Limited Warranty and adheres to Warranty Policy guidelines, use the following:

PART IDENTIFIER: 5700

LABOR OPERATION: 5700710 20 TU