LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1996 >> Passat GLS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (1.9L Turbo Diesel) >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

WARNING: This page is about a different car, the 1995 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Axle Shaft Flange Bolts 33 (45)
Camshaft Bearing Cap Nuts 15 (20)
Camshaft Sprocket Bolt 33 (45)
Connecting Rod Cap Bolts (1) 22 (30)
Crankshaft Bearing Cap Bolts (1) 48 (65)
Crankshaft Rear Oil Seal Flange Bolts 18 (25)
Crankshaft Sprocket Bolt (1) 66 (90)
Cylinder Head Bolts
Step 1 30 (40)
Step 2 44 (60)
Step 3 (2)
Step 4 (2)
Engine Mounts
Front
Bracket-To-Mount Top Bolt 44 (60)
Mount-To-Frame Bottom Bolt 41 (55)
Mounting Bracket-To-Engine Bolt 44 (60)
Left Rear
Bracket-To-Engine Mount Bolt 44 (60)
Bracket-To-Transaxle Bolt 18 (25)
Engine Mount Bolts 22 (30)
Right Rear
Bracket-To-Engine Mount Bolt 44 (60)
Engine Mount Bolts 44 (60)
Mounting Bracket-To-Engine Bolts 18 (25)
Engine-To-Transaxle Mounting Bolts
M10 Bolts 44 (60)
M12 Bolts 59 (80)
EGR
Connecting Pipe-To-EGR Bolts 18 (25)
Connecting Pipe-To-Manifold Nuts 18 (25)
Exhaust Manifold Nuts 18 (25)
Flywheel Bolts (1) 44 (60)
Fuel Injectors 52 (70)
Fuel Injector Lines 18 (25)
Generator Mounting Bolts 18 (25)
Glow Plugs 11 (15)
Idler Pulley Tension Lever Bolt 15 (20)
Intake Manifold Bolts 18 (25)
Oil Pan Bolts 15 (20)
Oil Pan Drain Plug 22 (30)
Oil Pump Housing Bolts
Long Bolt 18 (25)
Short Bolt 7 (10)
Timing Belt Tension Adjuster Bolt 15 (20)
Turbocharger
Exhaust Manifold Nuts & Bolts 18 (25)
Oil Return Line Banjo & Flange Bolt 22 (30)
Oil Supply Line Nuts 18 (25)
INCH Lbs. (N.m) 
Valve Cover Nuts 89 (10)
Water Pump Mounting Bolts 89 (10)
(1) Tighten bolt to specification plus additional 1/4 turn.
(2) Tighten additional 1/4 turn (90 degrees) using regular hand wrench.