Windows: Service and Repair

Automatic closing function, programming

From outside with ignition key in door lock (programming in parallel for all windows)

Windows open (or partially open)

- Close windows until blocking recognition responds with window closed (approx. 1/2 sec. after window stops)

- Operate key switch in close direction two times for at least 1-1/2 seconds each time.

Windows closed

- Operate key switch in close direction two times for at least 1-1/2 seconds each time.

From inside using window switch (programming each window individually)

Windows open (option 1)

- Operate window switch until window is closed.

- Release switch.

- Operate window switch two times for at least 1/2 second each time.

Windows open (option 2)

- Operate window switch until window is closed.

- Operate switch to open until window is fully open.

- Operate switch to close until window is fully close.

Windows closed

- Operate window switch in close direction for at least 1/2 second.

- Release switch.

- Operate window switch again in close direction for at least 1/2 second.

Note: The system is programmed by the user during normal operation without realizing that programming is taking place.