System Specifications

TIGHTENING SPECIFICATIONS
Coolant pump to coolant pump housing 10 Nm (7 ft. lbs.)
Thermostat housing to coolant pump housing 10 Nm ( 7 ft. lb. )
Coolant pump pulley to coolant pump 20 Nm ( 15 ft. lb. )
Coolant pump housing to engine block ( stretch bolt-always replace )
stage I 20 Nm ( 15 ft. lb. )
stage II additional 1/4 turn (90°)
Alternator bracket to coolant pump housing 30 Nm (22 ft. lb.)
Alternator to alternator bracket 25 Nm (18 ft. lb. )