Diagnostic Mode 4: Reset/Erase Diagnostic Data

Diagnostic mode 4: Reset/erase diagnostic data

Function

This diagnostic mode performs the following functions:
- All emission relevant malfunctions in DTC memory will be erased,
- The operating conditions at which a malfunction was stored will be reset,
- All adaptation values are being reset,
- All test results of the diagnostic functions are being reset.

Requirement
- DTC memory was erased.

Procedure
- Connect diagnostic tester.
- Start engine and let run at idle.
- Under address word 33, select "Diagnostic mode 4: Reset/erase diagnostic data.
Erased or reset:
- Number and content of the DTC memories,
- Operating conditions,
- Adaptation values,
- Test results.

- End diagnosis and switch ignition off.
- Generate readiness code