LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1996 >> EuroVan Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Specifications & Procedures) >> Wheel Alignment Specifications >> Front Axle (Vehicles Manufactured Up To 04/2000)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Axle (Vehicles Manufactured Up To 04/2000)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 Volkswagen EuroVan, 2002 Volkswagen EuroVan, 2001 Volkswagen EuroVan, 2000 Volkswagen EuroVan, and 1999 Volkswagen EuroVan. However, it is still accessible from the selected car via links, so may be relevant.
FRONT AXLE (VEHICLE GROUP 1 OR 2)

Load Condition Unladen 1/2 Net Load Full Load
Standing Height (+/- .079", 2mm) 10.75" (273 mm) 10.24" (260 mm) 9.76" (248 mm)
Toe Per Wheel (1) 10' +/-10' 0' +/-10' -0' +/-10'
Overall Toe (1) 20' +/-20' 0' +/-20' -20' +/-20'
Camber (Preferred) (2) -25' -40' -50'
Camber (Range) (2) -5 To -1° 5' -20' To -1° -30' To -1° 30'
Toe-Out Angle (3) 2° 10' To 2° 40' 2° 10' To 2° 40' 2° 10' To 2° 40'
Caster (4) 3° 10' To 3° 40' 3° 20' To 3° 50' 3° 30' To 4°
(1) Wheels not pressed.
(2) Maximum difference between sides 30'.
(3) Measure with wheels turned out 20° to either side.
(4) Measure longitudinal tilt of vehicle first. Caster specification is for zero vehicle tilt. Maximum difference between sides 1°.
FRONT AXLE (VEHICLE GROUP 3)

Load Condition Unladen 1/2 Net Load Full Load
Standing Height (+/- .079", 2mm) 10.43" (265 mm) 10.04" (255 mm) 9.76" (248 mm)
Toe Per Wheel (1) 5' +/-10' 0' +/-10' -10' +/-10'
Overall Toe (1) 10' +/-20' 0' +/-20' -20' +/-20'
Camber (Preferred) (2) -35' -45' -50'
Camber (Range) (2) -1° 15' To -15' -1° 25' To -25' -1° 30' To -30'
Toe-Out Angle (3) 2° 10' To 2° 40' 2° 10' To 2° 40' 2° 10' To 2° 40'
Caster (4) 3° 10' To 3° 40' 3° 20' To 3° 50' 3° 30' To 4°
(1) Wheels not pressed.
(2) Maximum difference between sides 30'.
(3) Measure with wheels turned out 20° to either side.
(4) Measure longitudinal tilt of vehicle first. Caster specification is for zero vehicle tilt. Maximum difference between sides 1°.
FRONT AXLE (VEHICLE GROUP 4)

Load Condition Unladen 1/2 Net Load Full Load
Standing Height (+/- .079", 2mm) 10.12" (257 mm) 9.92" (252 mm) 9.76" (248 mm)
Toe Per Wheel (1) 0' +/-10' -5' +/-10' -10' +/-10'
Overall Toe (1) 0' +/-20' -10' +/-20' -20' +/-20'
Camber (Preferred) (2) -45' -50' -55'
Camber (Range) (2) -1° 25' To -25' -1° 30' To -30' -1° 35' To -35'
Toe-Out Angle (3) 2° 10' To 2° 40' 2° 10' To 2° 40' 2° 10' To 2° 40'
Caster (4) 3° 10' To 3° 40' 3° 20' To 3° 50' 3° 30' To 4°
(1) Wheels not pressed.
(2) Maximum difference between sides 30'.
(3) Measure with wheels turned out 20° to either side.
(4) Measure longitudinal tilt of vehicle first. Caster specification is for zero vehicle tilt. Maximum difference between sides 1°.
FRONT AXLE (VEHICLE GROUP 5)

Load Condition Unladen 1/2 Net Load Full Load
Standing Height (+/-.079", 2mm) 10.12" (257 mm) 9.92" (252 mm) 9.76" (248 mm)
Toe Per Wheel (1) 0' +/-10' -5' +/-10' -10' +/-10'
Overall Toe (1) 0' +/-20' -10' +/-20' -20' +/-20'
Camber (Preferred) (2) -1° -1° 5' -1° 10'
Camber (Range) (2) -1° To -1° 40' -1° 5' To -1° 45' -1° 10' To -1° 50'
Toe-Out Angle (3) 2° 10' To 2° 40' 2° 10' To 2° 40' 2° 10' To 2° 40'
Caster (4) 3° 10' To 3° 40' 3° 20' To 3° 50' 3° 30' To 4°
(1) Wheels not pressed.
(2) Maximum difference between sides 30'.
(3) Measure with wheels turned out 20° to either side.
(4) Measure longitudinal tilt of vehicle first. Caster specification is for zero vehicle tilt. Maximum difference between sides 1°.
scientia non olet · About LEMON Manuals