Toe-In ADJUSTMEN: Rear

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 Volkswagen EuroVan, 2002 Volkswagen EuroVan, 2001 Volkswagen EuroVan, 2000 Volkswagen EuroVan, and 1999 Volkswagen EuroVan. However, it is still accessible from the selected car via links, so may be relevant.

Loosen nut "a" on control arm. See Fig 1 .

NOTE: If toe-in setting at rear wheels needs adjusting, also check brake pressure regulator setting. Adjust as needed. See appropriate BRAKE SYSTEMS article for specifications.

Move control arm forward or back until specification is achieved (vehicle weight on its wheels.) Tighten nut "a" to specification. See TORQUE SPECIFICATIONS . After fasteners are torqued, recheck all wheel alignment settings and readjust as necessary.

Fig 1: Adjusting Toe (Rear Axle)

Courtesy of VOLKSWAGEN UNITED STATES, INC.