LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1996 >> EuroVan Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Specifications & Procedures >> Wheel Alignment Procedures >> Camber Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camber Adjustment

  1. If necessary remove right-hand horn protective plate.
  2. Loosen bolt (a) and nut (b). See Fig 1 .
    NOTE: To loosen and tighten with wheel installed, turn steering as necessary. For proper torque, see TORQUE SPECIFICATIONS  .
    NOTE: Bolt connection is shown without wheel installed.
  3. Turn eccentric bushing (arrow A) with special tool (3252) until correct specification is achieved. See Fig 1 . Tighten bolt (a) and nut (b) again.
Fig 1: Adjusting Front Camber
G00149600Courtesy of VOLKSWAGEN UNITED STATES, INC.
scientia non olet · About LEMON Manuals