LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1995 >> EuroVan Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Disc Brakes) >> Bleeding Brake System >> Bleeding Procedures >> Using Scan Tool For ABS Bleeding Sequence
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Scan Tool For ABS Bleeding Sequence

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 Volkswagen EuroVan, 2002 Volkswagen EuroVan, 2001 Volkswagen EuroVan, 2000 Volkswagen EuroVan, and 1999 Volkswagen EuroVan. However, it is still accessible from the selected car via links, so may be relevant.

If a model equipped with ABS runs out of brake fluid in either side of reservoir, it will be necessary to use VAG 1551 scan tool or equivalent to bleed hydraulic unit and brakes.

  1. Connect VAG 1551 scan tool or equivalent to Data Link Connector (DLC). DLC is located under a small cover on center of dash.
  2. On scan tool press "0" and "3" to select address word BRAKE ELECTRONICS. Press "Q" button to confirm input. Press "0" and "4" to select diagnostic function 04 - BASIC SETTING. Press "Q" button to confirm input.
  3. The hydraulic pump is activated using display group 002. See Fig 1 . Bleed the hydraulic system. See BLEEDING WITH POWER BLEEDER  or BLEEDING WITHOUT POWER BLEEDER  .

Fig 1: Hydraulic Pump Activation Procedure
G00304120Courtesy of VOLKSWAGEN UNITED STATES, INC.
scientia non olet · About LEMON Manuals