Cylinder Head Component Layout

Cylinder Head Component Layout





1 - 20 Nm (15 ft lb)
2 - Intake manifold, upper section
3 - Gasket
4 - Valve cover
5 - Valve cover gasket and seal
- Replace if damaged
6 - Cylinder head assembly
7 - Cylinder head gasket
- Replace
- After replacing fill system with new coolant mixture
8 - 45 Nm (33 ft lb)
9 - Camshaft drive sprocket
- Note position when installing drive-belt
10 - Cylinder head bolt
- Observe assembly notes and sequence when loosening and tightening
11 - 10 Nm (7 ft lb)
12 - Oil filler cap
- Replace seal if damaged