Fox 1.8L Digifant II (Federal)
- Ensure ignition was NOT on before starting this test (heating element in regulator should be cold). Ensure engine is cold.
- Start engine and allow it to idle. Pinch air hose to regulator. Engine RPM must slightly decrease. If RPM does not decrease, replace auxiliary air regulator.
- If RPM does decrease, start engine and allow it to reach normal operating temperature. Radiator cooling fan must come on at least 2 times. Pinch air hose to regulator. Engine RPM should not change.
- If engine RPM changes, turn ignition off. Disconnect auxiliary air regulator wiring harness. Connect DVOM to wiring harness terminals. Start engine and allow it to idle. DVOM must indicate battery voltage.
- If battery voltage is present, replace auxiliary air regulator. If battery voltage is not present, check wiring harness for an open circuit.