LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1993 >> EuroVan CV, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> Intake Air Temperature Sensor >> EuroVan (2.5L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EuroVan (2.5L)

  1. Connect Scan Tester (VAG 1551) to Data Link Connectors (DLC) located in fold-down storage shelf in front of relay panel. Remove intake air temperature sensor from air intake duct.
  2. With scan tester in READ MEASUREMENT BLOCK function, read intake air temperature sensor value as displayed in channel No. 3 of scan tester. Spray sensor with cooling spray and observe value on scan tester.
  3. Scan tester value must drop. If temperature value does not change, repair intake air temperature sensor circuit or replace sensor as necessary. After repairs, erase Diagnostic Trouble Code (DTC) memory (if applicable) and select END DATA TRANSFER function.
scientia non olet · About LEMON Manuals