Test Procedure

Perform test steps according to table. See Fig 1 or Fig 2 .
If specified value/test is obtained, proceed to next step (test result OK).
If specified value test is not obtained, use table for troubleshooting and repair.
Use applicable wiring diagram for testing.
Disconnect test leads after each step.
If malfunction has not been eliminated after performing steps 1) to 5), replace driver's seat (J131) or passenger's seat (J132) heater control module.

Fig 1: Heated Seat Testing (Driver's Seat)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 2: Heated Seat Testing (Passenger's Seat)

Courtesy of VOLKSWAGEN UNITED STATES, INC.