LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1993 >> Corrado Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Servicing - M/T >> Adjustments >> Gearshift Linkage
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Gearshift Linkage

  1. Place gearshift lever in Neutral position. Remove knob and boot. Loosen bolt "A" and nut "B" sufficiently so that operating cables move freely in centering holes. See Fig 1 . Install Shift Linkage Gauge (3193). Loosen bolt "C". See Fig 2 .
  2. Pivot locating pin under bearing plate. Tighten nut "D". Place gearshift lever into left detent of slide. Move gearshift lever and slide together to left stop. Tighten slide with bolt "D". Move gearshift lever to right detent. Tighten bolt "E". Move gearshift lever to right detent. Tighten bolt "C".
    Fig 1: Identifying Centering Holes
    G92G01413Courtesy of VOLKSWAGEN UNITED STATES, INC.
    Fig 2: Installing Shift Linkage Gauge
    G92I01414Courtesy of VOLKSWAGEN UNITED STATES, INC.
scientia non olet · About LEMON Manuals