Service Precautions

Observe these precautions when working with air bag systems:

• DO NOT use computer memory saver tool. Using computer memory tool will keep air bag system active and may cause accidental deployment of air bag unit.
• Disable air bag system before servicing any air bag system or steering column component. See DISABLING & ACTIVATING AIR BAG SYSTEM  .
• Because of critical operating requirements of system, DO NOT attempt to service any air bag system component.
• Air bag parts should not be left unattended. They should be installed in vehicle immediately after obtaining them.
• Air bag components which have been dropped more than 18 inches should not be used.
• Chemical cleaners, oil and grease should not contact vinyl covering on air bag unit.
• DO NOT place stickers or covers on steering wheel.
• Always disable air bag system before performing electric welding on vehicle.
• Air bag system can only be tested using Diagnostic Tester (VAG 1551) and Multimeter (US 1119). Never use test light on air bag system.
• DO NOT expose air bag unit to temperatures greater than 194°F (90°C).