LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1992 >> Passat CL, 2.0 B, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal & Installation >> Hydraulic Modulator/Pump >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Depressurize brake system. See DEPRESSURIZING BRAKE SYSTEM. Disconnect negative battery cable. Unplug all electrical connectors from hydraulic modulator/pump. Identify and disconnect all hydraulic lines from hydraulic modulator/pump. Plug all line openings.
  2. From inside passenger compartment, remove push rod clevis pin. Remove hydraulic modulator/pump retaining nuts. Remove hydraulic modulator/pump. To install, reverse removal procedure. Tighten all fittings to specification. See TORQUE SPECIFICATIONS TABLE. Bleed brake system. See BLEEDING BRAKE SYSTEM.
scientia non olet · About LEMON Manuals