LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1992 >> Passat CL, 2.0 B, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> System Testing >> Solenoid Valves Ground Circuit Continuity Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Solenoid Valves Ground Circuit Continuity Test

  1. Turn ignition off. Remove jumper wire from previous test. Using an ohmmeter, check for continuity between ECU connector terminals No. 1 and 11. See Figure . If there is continuity, go to next step.
  2. If continuity does not exist, check for continuity between ECU connector terminal No. 1 and valve block housing and between hydraulic modulator and valve block housing. If continuity does not exist between ECU connector terminal No. 1 and valve block housing, repair wiring, and retest. If continuity does not exist between housings, repair as necessary.
  3. Reconnect jumper wire between ECU connector terminals No. 1 and 11. Check for continuity between ECU connector terminal No. 11 and valve block connector terminal No. 1 (Brown wire). See Figure and Figure thru Figure . If there is no continuity, repair wiring and retest.
scientia non olet · About LEMON Manuals