Power Circuits
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1992 Volkswagen Passat, 1992 Volkswagen Jetta, 1992 Volkswagen Golf, 1992 Volkswagen GTI, and 1992 Volkswagen Fox. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition off. Disconnect ECU connector. Turn ignition on. Using a voltmeter, check for battery voltage between ECU connector terminals No. 13 (negative) and No. 14 (positive). See Figure . If battery voltage is not present, repair wiring as required.
- Check terminals No. 13 (negative) and No. 1 (positive) for battery voltage. If battery voltage is not present, check fuse No. 18 on fuse block. If fuse is okay, check wiring from ECU connector to fuse box for open.