Airflow Sensor (VANAGON)
- Turn ignition off. Remove Electronic Control Unit (ECU) connector. Attach ohmmeter to ECU connector. See Figure
. Resistance should correspond to ECU PIN CHECK in AFC-DIGIFANT II AIRFLOW SENSOR RESISTANCE table.
- With ignition off, unplug connector from airflow sensor. Attach ohmmeter to airflow sensor terminal. See Fig 1
. Resistance should correspond to AIRFLOW SENSOR PIN CHECK in AFC-DIGIFANT II AIRFLOW SENSOR RESISTANCE table.
AFC-DIGIFANT II AIRFLOW SENSOR RESISTANCE
| Terminal |
Ohms |
| ECU Pin Check |
| No. 6 & No. 17 |
500-1000 |
| No. 17 & No. 21 |
|
| Airflow Sensor Pin Check |
| No. 3 & No. 4 |
500-1000 |
| No. 2 & No. 3 |
|
Courtesy of VOLKSWAGEN UNITED STATES, INC.