LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1989 >> Jetta GLI >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (EGR Function Testing - VOLKSWAGEN) >> EGR Function Testing - VOLKSWAGEN >> Test 9 >> 1988-94 All Models Except Diesel
April 5, 2026: LEMON Manuals is launched! Read the announcement.

1988-94 All Models Except Diesel

WARNING: This page is about a different variant/trim than selected.
  1. Operate engine at idle speed. Using a hand-held vacuum pump, apply 12 in. Hg to EGR valve. Engine should run rough or stall. If engine does not run rough or stall, check EGR valve pintle for movement. If EGR pintle is moving, EGR port is plugged. If EGR valve does not function, replace EGR valve.
  2. To check EGR port vacuum supply, connect vacuum gauge to EGR vacuum line using a "T" fitting. Start engine and increase engine speed to about 3000 RPM. Vacuum gauge should indicate vacuum. If vacuum is not present, vacuum source is plugged. Repair as necessary and repeat test.