Retrieving Codes
Locate combination rocker switch/indicator light at right of instrument panel. To display fault codes, turn ignition ON. Depress rocker switch for at least four seconds. Indicator lamp will display fault code as a series of flashes. For example, two flashes, followed by three flashes, followed by four flashes, followed by two flashes indicates the code 2-3-4-2. See DIGIFANT II ON-BOARD DIAGNOSIS (OBD) FAULT CODES (CALIFORNIA) TABLE for fault codes.
DIGIFANT II ON-BOARD DIAGNOSIS (OBD) FAULT CODES (CALIFORNIA)
| Flash Code | Fault Location | Probable Cause |
|---|---|---|
| 2142 | Knock Sensor | Defective Block Sensor; Knock Sensor Wiring |
| 2232 | Air Flow Sensor Potentiometer | Defective Air Flow Sensor Potentiometer; Potentiometer Wiring |
| 2312 | Coolant Temperature Sensor | Defective Coolant Temperature Sensor; Sensor Wiring |
| 2322 | Intake Air Temperature Sensor | Defective Intake Air Temperature Sensor; Sensor Wiring |
| 2342 | Oxygen Sensor | Defective Oxygen Sensor; Sensor Wiring |
| 4444 | No Faults Recorded | ---- |
| 0000 | End Of Fault Code Sequence (2.5 Second Flashes At 2.5 Second Intervals) | ---- |