LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1989 >> Golf Base, 1.8 A, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Cruise Control System Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control System Test

  1. Remove bi-pressure pump from its housing, and disconnect pump's harness connector.
  2. Press driver's door lock button in "UP" (Open) position. Voltage should exists at pump's harness connector. See 2.
  3. Press driver's door lock button in "DOWN" (Locked) position. Voltage should exists at pump's wiring connector. Refer to Fig. 3.
  4. If above conditions are not as specified, test switch and wiring. See WIRING DIAGRAMS. Door trim panel must be removed to reach master activator.
Fig 1: Open Position Voltage Check Schematic
G50J16435
Fig 2: Locked Position Voltage Check Schematic
G50A16436
scientia non olet · About LEMON Manuals