Inflator Module: Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1991 Oldsmobile Toronado, 1991 Cadillac Seville, 1991 Cadillac Eldorado, 1991 Buick Riviera, and 1991 Buick Reatta. However, it is still accessible from the selected car via links, so may be relevant.
- Install horn contact, steering wheel inflator module connector and CPA clip. Install inflator module to steering wheel.
- Tighten screws to 27 INCH lbs. (3.1 N.m). To complete installation, reverse removal procedure. Check INFLATABLE RESTRAINT indicator light to ensure system is functioning properly. See TESTING - SYSTEM OPERATION CHECK .