Fox - 1.8L Digifant I (California)
- Connect Scan Tester (VAG 1551) to Data Link Connectors (DLC) located in center console. With scan tester in READ MEASURING VALUE BLOCK function, press "00" to "05" buttons to select desired display group. See DISPLAY GROUP (FOX) table.
- When display group "00" is selected, only READ MEASUREMENT BLOCK is shown on display (the zeros do not appear on display). To switch between display groups, first press the "C" button. With READ MEASUREMENT BLOCK function completed, select END OUTPUT function on scan tester. Turn ignition off. Disconnect scan tester.
DISPLAY GROUP (FOX)
| Display Group No. & Channel No. | Display Parameters | |
|---|---|---|
| 00 | ||
| 3 | Coolant Temperature | |
| 5 | Oxygen Sensor Probe Signal | |
| 01 | ||
| 1 | Engine Speed | |
| 2 | Manifold Pressure (Airflow Sensor) | |
| 3 | Coolant Temperature | |
| 4 | Injection Time | |
| 02 | ||
| 1 | Engine Speed | |
| 2 | Intake Air Temperature | |
| 3 | Not Used | |
| 4 | Injection Time | |
| 03 | ||
| 1 | Engine Speed | |
| 2 | Coolant Temperature | |
| 3 | Not Used | |
| 4 | Injection Time | |
| 04 | ||
| 1 | Engine Speed | |
| 2 | Manifold Pressure (Engine Load) | |
| 3 | Not Used | |
| 4 | Injection Time | |
| 05 | ||
| 1 | Engine Speed | |
| 2 | Throttle Valve Potentiometer | |
| 3 | Not Used | |
| 4 | Injection Time | |