LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1987 >> Quantum Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> BOSCH Cis-E System >> Removal & Installation >> Knock Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. The knock sensor is attached at the front of the engine block. There are 2 types of sensors. The Type I sensor has its cable connection molded off center from the side of the sensor. No washers are used on fastening bolt. Tighten to 7-9 ft. lbs. (10-12 N.m).
  2. The Type II sensor has its connector cable molding centered on the side of the connector. It is tight end to 11-18 ft. lbs. (15-25 N.m) without washers.
scientia non olet · About LEMON Manuals