Sensor Plate Lever - Basic Adjustment

85VW2
Applies To ALL
Group


25
Subject

CIS-E


Part Identifier N/A
Key Points

Sensor plate lever, basic adjustment


B

Number

85-01

March 29, 1985
Sensor plate lever, basic adjustment

Note

Always perform basic adjustment of lever when replacing fuel distributor or air flow sensor..

Work sequence



- check distance between fuel distributor contact surfaces on air flow sensor and roller for sensor plate lever. If necessary, adjust with mixture adjustment screw using tool P-377.

4 cylinder engines

^ specified value: 19.0 +/- 0.1 mm (0.748 +/- 0.004 in.)

5 cylinder engines

^ specified value: 21.0 +/- 0.1 mm (0.827 +/- 0.004 in.)