Ignition Timing
CAUTION:
DO NOT connect any test equipment on terminal 15 (+) of ignition coil. This could damage electronic ignition parts. Use fuse No. 10 for connection.
- Connect tachometer and timing light. Disconnect plugs from idle stabilizer (squeeze connector to loosen) and connect together.
- With engine at normal operating temperature and correct idle, check timing. If timing is not to specifications, correct by turning distributor.
IGNITION TIMING SPECIFICATIONS DEGREES ATDC @ RPM
| Man. Trans. | Auto. Trans. |
|---|---|
| 5 @ 850-950 | 5 @ 850-950 |