LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1984 >> Rabbit Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Throttle Cable >> Vanagon
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Cable: Vanagon

  1. Loosen adjustment nut and remove override spring. Start engine, adjust idle speed to 800-1000 RPM and turn engine off. Push throttle lever forward until it stops.
  2. Using a screwdriver, turn adjustment rod until it contacts throttle lever pivot. Install override spring, start engine and check idle speed. If necessary, adjust idle speed by turning rod. Tighten lock nut on adjustment rod.
  3. Depress accelerator pedal to floor. Transaxle kickdown lever must be in kickdown position with 1/32-3/32" free play between lever and stop. Release accelerator pedal, kickdown lever must return to idle position. If necessary, adjust throttle cable at clamping bolt.
scientia non olet · About LEMON Manuals