Conversion Chart For Alignment Specifications (GROUP 44, NO. 91-05)

WARNING: This page is about the Rabbit L, 2D Hatchback, 1.6 G, which is a different variant/trim than selected.

Publication date: 1991-08-31
Reference number: GROUP 44, NO. 91-05

CONVERSION CHART FOR ALIGNMENT SPECIFICATIONS

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 44, NO. 91-05

CONVERSION CHART FOR ALIGNMENT SPECIFICATIONS

Model(s): All Volkswagen Models

Group: 44 - Wheels - Tires, Wheel Alignments

Bulletin No.: 91-05

Date: August 31, 1991

SERVICE INFORMATION

Because of differences in various alignment machines, different types of measurement readings exist in the field.

As a rule, Toe-in and Camber are given in angular degrees. Some alignment machines display figures for the Toe-in in fractions of an inch or decimal inches or in millimeters. The equivalent angular degrees can easily be obtained from the tables shown below.

CONVERSION CHART FOR TOE-IN DIMENSIONS

Toe-inDegree	13 Inch Rims mm	13 Inch Rims inch	13 Inch Rims fract	14 Inch Rims mm	14 Inch Rims inch	14 Inch Rims fract	15 Inch Rims mm	15 Inch Rims inch	15 Inch Rims fract
0.05°	0.33	0.013	---	0.35	0.014	---	0.39	0.015	1/64
0.06°	0.36	0.014	---	0.39	0.015	1/64	0.43	0.017	---
0.06°	0.39	0.015	1/64	0.42	0.016	---	0.47	0.018	---
0.08°	0.52	0.020	---	0.56	0.022	---	0.62	0.024	---
0.11°	0.66	0.026	---	0.71	0.028	---	0.79	0.031	1/32
0.12°	0.73	0.028	---	0.79	0.031	1/32	0.87	0.034	---
0.13°	0.79	0.031	1/32	0.84	0.033	---	0.93	0.036	---
0.16°	0.99	0.039	---	1.07	0.042	---	1.19	0.047	3/64
0.17°	1.05	0.041	---	1.12	0.044	---	1.25	0.049	---
0.18°	1.10	0.043	---	1.19	0.047	3/64	1.31	0.051	---
0.19°	1.19	0.047	3/64	1.28	0.050	---	1.41	0.055	---
0.21°	1.32	0.052	---	1.42	0.056	---	1.57	0.062	1/16
0.23°	1.46	0.057	---	1.57	0.062	1/16	1.73	0.068	---
0.25°	1.57	0.061	---	1.69	0.065	---	1.87	0.073	---
0.25°	1.58	0.062	1/16	1.70	0.066	---	1.88	0.074	---
0.26°	1.66	0.065	---	1.78	0.070	---	1.98	0.078	5/64
0.29°	1.83	0.072	---	1.98	0.078	5/64	2.18	0.086	---
0.31°	1.98	0.078	5/64	2.13	0.084	---	2.36	0.092	---
0.32°	2.00	0.079	---	2.15	0.085	---	2.38	0.093	3/32
0.33°	2.10	0.082	---	2.25	0.088	---	2.50	0.098	---
0.35°	2.21	0.087	---	2.38	0.093	3/32	2.63	0.103	---
0.37°	2.33	0.092	---	2.51	0.099	---	2.78	0.109	7/64
0.38°	2.38	0.093	3/32	2.56	0.100	---	2.83	0.111	---
0.41°	2.58	0.101	---	2.78	0.109	7/64	3.07	0.120	---
0.42°	2.65	0.104	---	2.82	0.111	---	3.12	0.122	---
0.42°	2.67	0.105	---	2.87	0.113	---	3.17	0.125	1/8
0.44°	2.78	0.109	7/64	2.99	0.117	---	3.31	0.130	---
0.47°	2.95	0.116	---	3.17	0.125	1/8	3.51	0.138	---
0.48°	2.99	0.118	---	3.22	0.127	---	3.57	0.140	9/64
0.50°	3.15	0.124	---	3.40	0.133	---	3.75	0.147	---
0.50°	3.17	0.125	1/8	3.41	0.134	---	3.77	0.148	---
0.53°	3.31	0.130	---	3.57	0.140	9/64	3.94	0.155	---
0.53°	3.33	0.131	---	3.58	0.141	---	3.97	0.156	5/32
0.57°	3.57	0.140	9/64	3.84	0.151	---	4.25	0.167	---
0.58°	3.66	0.142	---	3.94	0.1551	---	4.36	0.171	11/64
0.58°	3.67	0.144	---	3.96	0.1559	---	4.37	0.172	---
0.59°	3.68	0.145	---	3.97	0.156	5/32	4.39	0.173	---
0.63°	3.97	0.156	5/32	4.27	0.168	---	4.72	0.186	---
0.64°	4.00	0.157	---	4.30	0.169	---	4.76	0.187	3/16
0.64°	4.05	0.159	---	4.36	0.171	11/64	4.82	0.189	---
0.67°	4.20	0.165	---	4.55	0.179	---	5.00	0.196	---
0.69°	4.36	0.171	11/64	4.69	0.184	---	5.19	0.204	---
0.70°	4.42	0.174	---	4.76	0.187	3/16	5.26	0.207	---
0.74°	4.66	0.183	---	5.02	0.197	---	5.55	0.218	7/32
0.75°	4.72	0.185	---	5.08	0.200	---	5.60	0.220	---
0.76°	4.76	0.187	3/16	5.12	0.201	---	5.66	0.223	---
0.79°	5.00	0.196	---	5.38	0.211	---	5.95	0.234	15/64
0.82°	5.15	0.203	---	5.55	0.218	7/32	6.13	0.241	---
0.83°	5.25	0.206	---	5.70	0.224	---	6.20	0.244	---
0.85°	5.33	0.210	---	5.74	0.225	---	6.35	0.250	1/4
0.88° 0.88°	5.52 5.55	0.217 0.218	--- 7/32	5.95 5.97	0.234 0.235	15/64 ---	6.58 6.60	0.259 0.260	--- ---
0.92°	5.77	0.227	---	6.25	0.246	---	6.85	0.269	---
0.94°	5.89	0.232	---	6.35	0.250	1/4	7.02	0.276	---
0.94°	5.95	0.234	15/64	6.40	0.252	---	7.08	0.278	---
0.95°	6.00	0.236	---	6.45	0.254	---	7.14	0.281	9/32
1.00°	6.30	0.248	---	6.80	0.267	---	7.50	0.295	---
1.01°	6.35	0.250	1/4	6.83	0.269	---	7.55	0.297	---
NOTE: Toe-in degree values in the above chart have been rounded off to the second decimal place only.

ADDITIONAL CONVERSION CHARTS

To eliminate the confusion about converting specifications from degrees/minutes to degrees decimal and fractional inches to decimal inches and metric (mm) equivalents, use the following conversion charts.

DECIMAL DEGREE TO MINUTES CONVERSION CHART

Degrees	Minutes
0.05°	3
0.10°	6
0.15°	9
0.20°	12
0.25°	15
0.30°	18
0.33°	20
0.35°	21
0.40°	24
0.45°	27
0.50°	30
0.55°	33
0.60°	36
0.65°	39
0.66°	40
0.70°	42
0.75°	45
0.80°	48
0.85°	51
0.90°	54
0.95°	57
1.00°	60

INCHES TO MILLIMETERS CONVERSION CHART

Fractional Inches	Decimal Inches	Decimal Millimeters
1/64	0.016	0.40
1/32	0.031	0.79
3/64	0.047	1.19
1/16	0.063	1.59
5/64	0.078	1.98
3/32	0.094	2.38
7/64	0.109	2.78
1/8	0.125	3.18
5/32	0.156	3.97
3/16	0.188	4.76
7/32	0.219	5.56
1/4	0.250	6.35
9/32	0.281	7.14
5/16	0.313	7.94
11/32	0.344	8.73
3/8	0.375	9.53
13/32	0.406	10.32
7/16	0.438	11.11
15/32	0.469	11.91
1/2	0.500	12.70
17/32	0.531	13.49
9/16	0.562	14.28
5/8	0.625	15.88
21/32	0.656	16.67
11/16	0.719	18.26
3/4	0.750	19.05
25/32	0.781	19.84
13/16	0.813	20.64
27/32	0.844	21.43
7/8	0.875	22.23
29/32	0.906	23.02
15/16	0.938	23.81
31/32	0.969	24.61
1	1.000	25.40