All Other Models
- Warm engine to normal operating temperature. Turn engine off. Connect tachometer and timing light, following manufacturer's instructions.
- Disconnect both plugs at idle stabilizer unit (squeeze connectors to loosen). Connect plugs together. Start engine. With engine at correct idle, check timing. If not to specifications, adjust timing by turning distributor.
IGNITION TIMING
| Application |
Degrees@RPM |
| Vanagon |
| |
Federal |
7.5 BTDC@800-950 |
| Calif. |
|
5 ATDC@850-950 |
| All Other Models |
3 ATDC@850-1000 |