1975-77 Rabbit & Scirocco
- Check vacuum hoses for damage and proper routing. Start and warm engine to normal operating temperature. To test first stage of EGR valve, temporarily connect vacuum hose from anti-backfire valve to EGR valve. Engine should run rough or stall. If not, check for clogged EGR passage or faulty EGR valve.
- On California models, test full load enrichment switch. To test full load enrichment switch, turn ignition off. Connect ohmmeter to switch terminals. Close throttle valve. Ohmmeter should read infinity.
- Depress accelerator to floor. Just before pedal reaches floored position, ohmmeter reading should change to zero ohms. If not, adjust switch by loosening retaining screws. Repeat step 2 to verify proper adjustment.