Water Pump: Installation
To install, reverse removal procedure and make sure to use new "O" ring in recess in pump mounting flange.
NOTE:
Do not use sealer between water pump mounting flange and engine block.
TIGHTENING SPECIFICATIONS
| Application |
Ft. Lbs. (N.m) |
| Timing Belt Tensioner Lock Nut |
33 (45) |
| Intermediate Sprocket Bolt |
59 (80) |
| Crankshaft Sprocket Bolt |
59 (80) |
| Water Pump Pulley Bolts |
15 (20) |
| Crankshaft Pulley Bolts |
15 (20) |
| Drive Plate-to-Crankshaft Bolts |
55 (75) |
| Connecting Rod Cap Bolts |
33 (45) |
| Main Bearing Cap Bolts |
48 (65) |
| Cylinder Head Bolts |
54 (75) plus 1/4 turn |
| Ball Joints |
36 (49) |
| Axle Nuts |
173 (235) |
| Manifold-to-Cylinder Head Bolts |
18 (25) |
| Water Pump Bolts |
15 (20) |