All Other Models (Front)
Front wheel bearings are pressed into bearing housing and no adjustment is necessary. Tighten front axle nut to 167 ft. lbs. (23 mkg) on Dasher models or 175 ft. lbs. (24.2 mkg) on Rabbit and Scirocco models.
Front wheel bearings are pressed into bearing housing and no adjustment is necessary. Tighten front axle nut to 167 ft. lbs. (23 mkg) on Dasher models or 175 ft. lbs. (24.2 mkg) on Rabbit and Scirocco models.