Cutout Relay
- With armature in cut-in position, adjust bending of spring to "a".008-.020" (.20-.51 mm), by bending bracket "C". See illustration.
- With armature in cut-out position, adjust gap "b" to 0.015 - 0.047" (0.38 - 1.19 mm) by bending "B" (stationary relay point). The necessary pressure "c" for closing the points has to be 4.22 oz. (119.6 gm). See illustration.
- Adjust the cut-in voltage by bending bracket "C". If further adjustment is needed, bend stop "D". To increase the reverse current, decrease clearance "a" by bending "B" and vice versa.
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.