Type II (Rear)
If adjustment is necessary, loosen bolts attaching bearing housing to spring plate and diagonal arm. To adjust, change position of bearing housing in elongated holes in spring plate. Tighten bolts and recheck toe-in.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | ||
|---|---|---|---|---|---|---|
| Inner | Outer | |||||
| Type 1 (Front) | ||||||
| Exc. Super Beetle | 3 1/3±1 | 1/2±1/3 | 1/6 to 7/32 | 20 | 18 | |
| Super Beetle | 2±1/2 | 1+1/3 or -2/3 | 3/32 to 3/16 | 20 | 19 to 20 | |
| Type 1 (Rear) | ||||||
| Exc. "The Thing" | ..... | -1±2/3 | -5/64 to 5/64 | ..... | ..... | |
| "The Thing" | ..... | 1/3±2/3 | -5/64 to 5/64 | ..... | ..... | |
| Type II | ||||||
| Front | 3±2/3 | 2/3±1/3 | 0 to 1/8 | 20 | 17 to 18 | |
| Rear | ..... | -5/6±1/2 | -3/64 to 9/64 | ..... | ..... | |
| Type IV | ||||||
| Front | 1 3/4±1/2 | 1 1/6±1/2 | 1/64 to 1/8 | ..... | ..... | |
| Rear | ..... | -1±1/2 | 1/64 to 1/8 | ..... | ..... | |
| Dasher | ||||||
| Front | 1/6±1/2 | 5/12±1/2 | -1/12 to 5/12 | ..... | ..... | |
| Rear | ..... | -1/2±1/2 | -5/6 to 5/6 | ..... | ..... | |