Engine Cannot Be Started (Pump Inoperative)
- Cables to pump, pump relay or cables on pump relay are defective. Check if pump relay operates (switch ignition on and off, listen for clicking relay sounds).
- Pump relay has no voltage at terminal 86 (+12 volts), because main relay inoperative or cable defective. Test with voltmeter.
- Pump relay has +12 volts at terminal 86 but no ground at 85.NOTE: Relay operates only approximately 1 to 1 1/2 seconds after switching ignition on. Test with voltmeter. Relay is wired from ground via control unit.