LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1966 >> Fastback Eng CD AD, Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Gears & Linkage >> Adjustment - Off Vehicle
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Adjustment - Off Vehicle

  1. Insert measuring head of suitable adjusting tool (VW 280) in mounting tube. Ensure feeler plate contacts worm spindle. Slide setting plate until pitman arm number (311 415 371) is under mark.
  2. Turn pitman arm 9-13° right or left.
    NOTE: 9-13

    ° range is applicable only if pitman arm shaft and/or worm spindle is replaced, otherwise use 5  °. Turn adjusting screw in until no further play is felt. Simultaneously move pitman arm slightly while holding worm. Torque lock nut to specification. Check play-free range at opposite lock. If play is felt within specified range, dismantle gear and replace shim: If play-free angle is greater than specified, use thicker shim; if less than specified, use thinner shim.

  3. When adjustment is set, press worm spindle oil seal in place. Remove housing cover and fill with 5.4 oz. suitable lubricant. Fill adjusting screw hole with same lubricant. Install new plastic plugs in housing. Replace cover with gasket, torquing bolts to specifications. Recheck pitman adjustment. Mark center position with paint and secure with new ring.
scientia non olet · About LEMON Manuals