Utility [11/2018 - ]
- CLEAR WINDOW POSITION DATA NOTE:
If "Reset Memory" is performed, DTC B2313 will be output.
- Turn the ignition switch off.
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Body Electrical / (desired system) / Utility / Reset Memory.
- Select the "Reset Memory" to clear the window position data using the Techstream.
Body Electrical > D-Door Motor > Utility
Tester Display Reset Memory Body Electrical > P-Door Motor > Utility
Tester Display Reset Memory Body Electrical > RL-Door Motor > Utility
Tester Display Reset Memory Body Electrical > RL-Door Motor > Utility
Tester Display Reset Memory