Utility [12/2021 - ]

If any of the following parts have been replaced, perform beam/optical axis learning. Otherwise all systems that use the parts may be affected.

• Millimeter Wave Radar Sensor Assembly:

  HINT: 

  Beam axis alignment of the millimeter wave radar sensor assembly can be performed using either Triangle Target, Flat Surface Target or Driving Adjustment.

  Triangle Target: Refer to TARGET ADJUSTMENT(TRIANGLE TARGET) [12/2021 - ]

  Flat Surface Target: Refer to TARGET ADJUSTMENT(FLAT SURFACE TARGET) [12/2021 - ]

  Driving Adjustment: Refer to DRIVING ADJUSTMENT [12/2021 - ]

• Forward Recognition Camera:

  HINT: 

  Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.

  One Time Recognition: Refer to TARGET ADJUSTMENT(ONE TIME RECOGNITION) [12/2021 - ]

  Sequential Recognition: Refer to TARGET ADJUSTMENT(SEQUENTIAL RECOGNITION) [12/2021 - ]

  Driving Adjustment: Refer to DRIVING ADJUSTMENT [12/2021 - ]