LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2019 >> Yaris LE >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Manifold Absolute Pressure Sensor >> Removal [07/2015 - ] >> Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal [07/2015 - ]: Procedure

  1. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR 
    1. Disconnect the negative battery cable.

      Refer to REMOVAL [07/2015 - ]

    2. Disconnect the MAP sensor/IAT sensor No. 2 connector.
    3. Remove the screw.
      GTY490114Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Screw
      *b MAP Sensor/IAT Sensor No. 2
      *c Vehicle Front
    4. Remove the MAP sensor/IAT sensor No. 2.
scientia non olet · About LEMON Manuals