LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2018 >> Tacoma Limited, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FKS) - Service Information >> Engine Coolant Temperature Sensor >> Removal [08/2015 - ] >> Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal [08/2015 - ]: Procedure

  1. REMOVE INTAKE MANIFOLD 

    (Refer to REMOVAL [08/2015 - 11/2017] , or refer to REMOVAL [11/2017 - ] )

  2. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the connector from the engine coolant temperature sensor.
    2. Remove the clip and engine coolant temperature sensor from the rear water by-pass joint.
      GTY589685Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals