Window Defogger Wire: Repair: Procedure
- INSPECT WINDOW DEFOGGER WIRE NOTE:
Do not operate the rear window defogger until the paint is completely dry. It may cause other malfunctions if it is used before the paint is dry.
- Clean and degrease the area of the rear window defogger.
- Attach tape to both sides of the rear window defogger.
*a REPAIR LOCATION *b TAPE *c REAR WINDOW DEFOGGER - Using a small brush or marking pen, apply silver paint.
- Remove the tape without damaging the applied area.
- Follow the instructions for the commercially available silver paint and dry the repaired area.