LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> Prius Prime Advanced >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System Warning Buzzer - Service Information >> Pre-Collision System Warning Buzzer >> Inspection [09/2016 - 05/2019] >> Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection [09/2016 - 05/2019]: Procedure

  1. INSPECT SKID CONTROL BUZZER 
    1. Make sure that there is no looseness in the locking part and connecting part of the connector.
      GTY539877Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the skid control buzzer connector.
    3. Check the connector and terminals for deformation and corrosion.

      OK

      No deformation or corrosion.

    4. Connect a positive (+) lead from the battery to terminal 2, and a negative (-) lead to terminal 1 of the skid control buzzer, and check that the buzzer sounds.

      OK

      The skid control buzzer sounds.

      If the result is not as specified, replace the skid control buzzer.

scientia non olet · About LEMON Manuals