Crawl Switch: Removal: Removal
WARNING: This page is about a different car, the 2013 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- PRECAUTION NOTE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Refer to PRECAUTION .
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
- REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION . Refer to REMOVAL - Step 15
- REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH . Refer to REMOVAL - Step 16
- REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION . Refer to REMOVAL - Step 17
- REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH . Refer to REMOVAL - Step 18
- REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY . Refer to REMOVAL - Step 19
- REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY . Refer to REMOVAL - Step 20
- REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY . Refer to REMOVAL - Step 21
- REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY . Refer to REMOVAL - Step 22
- REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY . Refer to REMOVAL - Step 23
- REMOVE SUSPENSION CONTROL SWITCH (CRAWL SWITCH)
- Disconnect the 2connectors.
- Detach the 4 claws and remove the suspension control switch (CRAWL switch) from the upper console panel.